home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
PACKET
/
RXCLU50.ZIP
/
MESSAGES.TXT
< prev
next >
Wrap
Text File
|
1993-12-08
|
6KB
|
200 lines
# MESSAGES FILE FOR RXCLUS V 5.0
# Texts may be modified or translated, but the length mentioned in brackets
# may not be exceeded.
# Comment lines must start with a "#" in the first column. You can add as
# many comment lines and blank lines as you wish.
# The sequence and number of the texts may NOT BE CHANGED !
# VOCABULARY
# Abrev. for the days of the week (7*3 letters without spaces,Sunday first)
SunMonTueWedThuFriSat
# Letter used to accept a proposal
Y
# Letter used to reject a proposal
N
# Translation of the word "to" (5)
to
# Translation of the word "or" (8)
or
# Translation of the word "for" (8)
for
# Translation of the word "End" (6)
End
# Translation of the word "next" (6)
next
# Translation of the word "Latitude" (15)
Latitude
# Translation of the word "Longitude" (15)
Longitude
# Translation of the word "command" (12)
command
# Translation of the word "unknown" (15)
unknown
# Translation or abreviation of "Record" (6)
Record
# Translation of "invalid" (20)
invalid
# Translation of "must be" (15)
must be
# Translation of "not found" (20)
not found
# Translation of "Quit RXCLUS" (40)
Quit RXCLUS
# TEXTS FOR THE TOP LINE (spaces at the beginning are added automatically)
# during the DX database viewing (75)
QRG Callsign Date UTC Remarks Logger
# during the WWV database viewing (74)
Date UTC Flux A K Forecast Logger
# TEXTS FOR THE BOTTOM LINE
# while receiving informations (17)
Receive mode
# while monitoring the traffic (17)
Monitor mode
# while checking the buffer (15)
Revue mode
# TEXTS FOR THE HELP WINDOW (F1)
# Translation of "HELP" (5)
HELP
# Help on Alt-G (30)
Toggle bell on/off
# Help on Alt-M (30)
direct link to the TNC
# Help on Alt-P (30)
Toggle printer on/off
# Help on review mode (when entered with the Up key) (25)
last info
# Help on review mode (when entered with the PgUp key) (25)
one page ahead
# Help on review mode (when entered with the Home key) (25)
start of the buffer
# Help on F2 (text added after "SHOW/DX") (25)
all informations
# Help on F4 (text added after "SHOW/DX") (40)
by DX call (with *: part of call)
# Help on F5 (text added after "SHOW/DX") (40)
by band (1.8 to 1296 MHz)
# Help on F6 (text added after "SHOW/DX") (40)
by comment
# Help on F7 (text added after "SHOW/DX") (40)
by logger
# Help on F9 (DOS Shell) (25)
DOS Shell
# Help on F10 (SHOW/COUNTRY) (51)
Country informations (usually 2 letters)
# Msg asking for an <ESC> to continue (25)
Back with <ESC>
# TEXTS USED WITH THE FUNCTIONS F2...F10 IN RECEIVE MODE
# F2+F3: warning if the SHOW mode is not available
# (1st line) (50)
Databases cannot be accessed
# (2nd line) (50)
(DISK=0 in RXCLUS.CFG)
# F2: warning if DXINFO.DAT cannot be opened (80)
Cannot open or create the DX database !
# F2: warning if DXINFO.DAT is empty (50)
No record in the DX database !
# F3: warning if WWVINFO.DAT cannot be opened (80)
Cannot open or create the WWV database !
# F3: warning if WWVINFO.DAT is empty (50)
No record in the WWV database !
# F4: prompts for the DX callsign (70)
String to look for in the DX callsigns :
# F5: prompts for the frequency band (60)
Frequency band in MHz :
# F6: prompts for the comment to look for (70)
String to look for in the comments :
# F7: prompts for the logger to look for (70)
Search infos from logger :
# F4..F7: Text on the bottom line in Criterial search mode (31)
Criteriel search
# F4..F7: Text on the bottom line while seeking for matching infos (31)
Searching...please wait
# Message if no record was found
# (1st line) (40)
No such record
# (2nd line) (40)
found !
# F9: Text displayed at the beginning of a DOS Shell session (60)
Type EXIT to return to RXCLUS...
# F9: warning if no DOS SHELL can be started (60)
Cannot run COMMAND.COM :
# F9: out of memory (30)
out of memory
# F9: DOS error number (25)
DOS error number
# F10: prompts for a prefix (50)
Country prefix :
# warning if the prefix was not found (50)
Prefix not found !
# warning if the database COUNTRY.DAT is missing (50)
Unable to find the file COUNTRY.DAT
# MESSAGES WHILE USING THE DATABASES (AFTER F2 or F3)
# F2: prompts the user to edit a record
# (1st line) (50)
You may edit this record now
# (2nd line) (50)
End with <CR>
# F2: prompts for a confirmation before saving the changes (50)
Save the changes ?
# F3: if the record has no deletion mark
# (1st line) (50)
Tag this record
# (2nd line) (50)
for deletion ?
# F3: if the record already has a deletion mark (50)
Remove the deletion mark ?
# F4 : prompts for a confirmation before deleting all tagged records
# (1st line) (50)
Delete all tagged
# (2nd line) (50)
records ?
# F5: prompts for a confirm. before deleting the beginning of the file (50)
Delete all records older then this one ?
# F5: prompts for a second confirmation (25)
Are you sure ?
# F5: warning if a backup file (.BAK) already exists
# (1st line) (40)
must first be deleted
# (2nd line) (40)
manually !
# F5: confirmation that the old database was saved... (40)
Database renamed in .BAK
# F5: ...and that the wanted records are being copied
# (1st line) (50)
Copying the records in
# (2nd line) (50)
the new database...
# F5: confirmation that the new database is ready
# (1st line) (50)
The new database is available
# (2nd line) (50)
the old one was saved with the
# (3rd line) (50)
extension .BAK
# OTHER MESSAGES
# Text asking to press any key to continue (50)
Press any key
# Error message if the printer is not ready (30)
Printer is not ready